01 Camera
2 MP monochrome global-shutter USB camera on an overhead arm. Commodity hardware, no proprietary compute module.
VZSOR Station
One bench station. Everything needed to inspect a part.
Camera, light, fixture and software, set up to work together. You do not choose lenses or design lighting.
Book a pilot02 Light box
Diffuse LED light box (CRI > 95) set to one fixed level, so reflective parts look the same on every shot.
03 Fixture
V-block fixture with a hard stop. Every part sits in the same place, at the same angle.
04 Software
Capture, train and inspect in one app. PASS/FAIL, heatmap, operator override, per-part log, CSV export.
Specs
Development rig.
Measured on our development station in Austin. Pilot hardware may differ. The field of view suits small parts such as brackets and sub-assemblies. Large panels do not fit.
- Sensor
- OV2311, 2 MP mono, global shutter
- Image
- 1600 × 1200 px
- Resolution
- ≈ 0.056 mm per pixel
- Field of view
- ≈ 90 × 67 mm
- Lighting
- Diffuse LED box, CRI > 95
- Model
- Anomaly detection, trained on good parts only
- Runs on
- Local computer, no internet needed
- Records
- Image, heatmap, result, operator, lot · CSV export
- Not yet
- PLC / MES output